![]() ![]() and the following morning, all the gluing seems to be very strong. The clamp is simply holding the top plate flush. Where the plastic top plate is broken off, I used the glue gun to fill the void, and fit a screw through my previous epoxy repair to secure the top plate at the other side. now I take it the UV has only cured the outside part, but it seems to be holding. ![]() The bracket is reversed, and bonded to the chassis with some of the UV cure adhesive I've tried before. a change of tack was required, there just isn't enough strength here. as again there were sheered off screw fittings. ![]() Once the epoxy had cured it was flattened off, and it was at this point I realised that the top plate was no longer secured to the chassis. The speed change detent arm was exceptionally seized up, and required plenty of heat to get it to free up. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |